Hvac School - For Techs, By Techs

In this short podcast episode, Bryan talks about pilot controls. He talks about the old-school ignition systems on gas appliances and some similar pilot functions on residential A/C units and heat pumps. When we think about a pilot light on a gas appliance, we can think of it as a small standing flame that sits there ready to ignite the burner whenever gas is flowing. Pilot lights were necessary for old-school gas furnaces, and many of those pilot lights worked with a thermocouple. In many older furnaces, pilots also prevent excessive carbon monoxide from unspent gas. In other words, the pilot is not the main burner; it merely sets up the main burner.  On a typical A/C system, the 24v power is similar to a pilot on a gas appliance; the 24v “pilot” control energizes the system and has a small amount of voltage (compared to the high voltage needed for all of the components to work).  The reversing valve on heat pumps also has a pilot valve; the 24v signal activates the pilot valve with the solenoid, which redir