Hvac School - For Techs, By Techs

This podcast episode is Part 1 of a Kalos class on rack refrigeration given by Matthew Taylor. This first segment focuses on the basic refrigerant circuit and oil management of a parallel rack system, common in market refrigeration. Parallel racks follow the same general process as any other compression refrigeration system. However, they contain multiple compressors on a single rack. These systems have multiple suction lines that tie into one single suction header that feeds into multiple compressors. The suction side of the piping is usually a long distance with varying elevations; risers are vertical stretches of piping that carry oil and refrigerant up and pose a challenge for oil return. The compressor takes low-pressure vapor on the suction side and turns it into high-pressure vapor on the discharge side. From there, the condenser rejects heat from the refrigerant, which brings the superheated vapor down to saturation temperature and further rejects heat to make the refrigerant fully liquid (subcooled).